You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

kubota_man

Unregistered

1

Saturday, July 7th 2012, 1:45pm

Sprinkler zone turns on for 2 minutes

Hello everyone,

I have a problem with only one of my several zones for my sprinkler system. The zone only turns on for 2 minutes, then shuts off. I changed the zone to a different zone on the main controller but still the same thing. The time I have set for the zone is 15 minutes.

I'm not exactly sure what to do, but it continues to only work for 2 minutes than shuts off. I'm going to take the obvious step and undo the wiring for that valve and redo it, but if that doesn't work, does anyone have a clue as to what could be wrong? My controller works fine with all of the other zones.

Thanks!

kubota_man

Unregistered

2

Saturday, July 7th 2012, 4:15pm

update

I redid the wiring with no luck. The system still ran at 2 minutes for this zone. I then switched the zones in the main controller which led to a success for switching the problematic zone into an earlier zone. I know get 15 minutes out of the zone like I should, but the replaced zone has the same problem of 2 minutes now.

I have concluded that I need a new controller. I am going to go with the RainBird STP9PL 9 Station Controller due to its simplicity and cost.

I wish I could have one of the fancy cloud based ones I could control from my computer but those are out of my price range.

Wet_Boots

Supreme Member

Posts: 4,082

Location: Metro NYC

3

Sunday, July 8th 2012, 4:09am

The fact that the zone valve solenoid is possibly shorting out hasn't occurred to you, I suppose.

kubota_man

Unregistered

4

Sunday, July 8th 2012, 7:49pm

I changed the solenoid with a new one and it did nothing. Every zone I switched with the problematic zone on the main controller has only ran for 2 minutes.

Rate this thread