You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.




Saturday, January 28th 2012, 9:39pm

Controller says its watering but it not working

I recently bought a house with a sprinkler system. It has a Hunter SRC controller. I was running the system by zone this morning to check the heads and everything worked fine. I worked in the my flower bed and then came back to turn that zone on and it would not water. I tried all the other zones and none will work. The controller says it is working but it is not. Where should I start in trying to repair this. Thanks for any input.


Supreme Member

Posts: 493

Location: Seattle


Saturday, January 28th 2012, 11:13pm

Sounds like you possibly cut the irrigation wire when you were working in the garden.

If you have a multimeter you can ohm out the valves by touching the common wire and each zone wire .. A normal ranger is 20-60. If you don't get any ohms then the wire is cut

Rate this thread