You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

rnakawat

New Member

1

Sunday, January 8th 2012, 6:39pm

Design advice needed for a slope

We have a back yard slope about 20 feet high and about 30 feet deep. We just have fruit trees and a few scrubs on the slope. The house is at the bottom of the hill, with about 15 feet of flat grassy area between the slope and the house. The slope is currently not on an irrigation system, but the grassy/flat graden area is. It appears the previous owners tapped into the line that goes through the house. The pressure is good (80 PSI) but is using 1/2" pipes. I'd like to add irrigation to the slope and replace the irrigation for the rest of the garden as well.

I have a few concerns I was hoping to get some feedback on :

1) If I add the slope area to the irrigation, do I need to be worry about backflow back into the house and how's the best way to address it? Does the backflow need to be at the top of the hill?
2) Would it be better to tap into the main?
3) What top of sprinklers should I use? I was thinking of just bubblers.

If anyone knows someone that installs in Orange County, CA please send me a reference as well.

Wet_Boots

Supreme Member

Posts: 4,062

Location: Metro NYC

2

Monday, January 9th 2012, 2:44pm

Half-inch pipe absolutely stinks as a supply for irrigation. You want to upgrade that if you have a large area to deal with. However, if you want to go with drip irrigation on the slope, then you can get by as is. For just that one zone, you would have a vacuum breaker at the top of the slope, for backflow protection.

Rate this thread