You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.


New Member

Posts: 3

Location: New Jersey


Tuesday, June 25th 2013, 3:52pm

"FUS" from


What does the blinking FUS code mean?
A. - The controller may have
detected an overload of the
amperage allowed (For example, a
shorted solenoid, a shorted wiring
or a high end surge or spike).
How to reset the FUS code on a
Rain Dial Controller?
If the “FUS” warning does not go
away after pressing either the Plus
(+) or Minus (-) Buttons, follow the
instructions below:
1. While the controller is
power-up, disconnect the
“Ribbon Cable” from the socket on the terminal board.
2. Disconnect the 9 volt battery.
3. Set the “PROGRAM” switch to “B”
4. Set the “MODE” Switch to Set Program (Middle) position between “OFF &
5. Hold down the “MANUAL” button while reconnecting the ribbon cable.
6. Reset Current Time.

Similar threads

Rate this thread