You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.


New Member


Tuesday, June 7th 2011, 10:46pm

Hunter SRC Controller Locked in Off Mode

I have a Hunter SRC controller. It worked last summer and over the winter when I went to turn it on the read-out only was in the Off mode. I can not program anything on the controller. I've tried to unplug it and then plug it back in without any change.



Posts: 2,324

Location: USA


Wednesday, June 8th 2011, 2:05am

Did you take the back up battery out when you unplugged it?


This came out of the manual for the SRC Plus. lol at the size of the font. Best I could do.

Clearing the Controller's Memory/ Resetting the Controller

If you feel you have misprogrammed the controller, there is a process

that will reset the memory to factory defaults and erase all programs and

data that has been entered into the controller.

1. Press and hold down the , and buttons.

2. Press and release the reset button in the lower wiring compartment.

3. Release the , and buttons. The display should now show

12:00AM. All the memory has been cleared and the controller may

now be reprogrammed.

This post has been edited 1 times, last edit by "mrfixit" (Jun 8th 2011, 2:19am)


New Member


Wednesday, June 8th 2011, 6:29pm

Hunter SRC Controller Locked in Off Mode

Mrfixit thanks for your help. It worked and my system is now running!

Similar threads

Rate this thread