You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

probb

Unregistered

1

Saturday, April 16th 2011, 7:15pm

All Valves Are On

Have an Indoor Irritrol Rain Dial Plus Controller -- 12 Zone -- running 10 zones. Several years old now. All was well when shut down for Winter. Firing back up now and All Of The Valves Are On... No Controller Function/Impact upon the Valves. Controller shows no fault codes. Reset Controller by Removing Battery Backup and Disconnecting Transformer. No Effect. Cleaned Valves. No Effect.

mrfixit

Moderator

Posts: 1,418

Location: USA

2

Saturday, April 16th 2011, 7:32pm

Try this, turn all of the flow controls off. Then with the water supply on to the manifold open up the flow controls one at a time. You probably don't even need to turn them all off. You could just turn them off one at a time with the manifold under pressure. I bet after you shut down half of them the other's shut off by themselves.

probb

Unregistered

3

Saturday, April 16th 2011, 8:09pm

BINGO!

Many thanks! All is right with the system, once again!

Similar threads

Rate this thread