You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Denconfused

Starting Member

1

Sunday, May 13th 2018, 12:31pm

Single valve will not operate like the other 5.

My number one valve will not start, the other five work fine.

I have appropriate power off the timer on terminal 1, I replaced the solenoid just to eliminate any issues there, though the new solenoid feels warm.

Power voltage reading is the same at timer connection and solenoid connection. I moved the #1 lead to the number 2 connection since it is working properly, number 1 will still not activate by itself.

I back out the solenoid and get water moving, then tighten it back down when leaking stops, the number 1 valve runs for a few seconds and the valve shuts off while there is still time on the timer.

Voltage, Ohms check all as recommended.

What am I missing here?

mrfixit

Moderator

Posts: 2,274

Location: USA

2

Sunday, May 13th 2018, 4:06pm

It sounds like there's something wrong with the valve.
It's usually the diaphragm.
Sometime's there's a clogged port.
Can you post a pic of the valve? Or give the make and model?
Go to www.tinypic.com, upload your pic there, then cut and paste the "forum" code to your post.

Rate this thread