You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.


Friday, August 11th 2017, 9:34pm

Need help replacing valve and solenoid

Could anyone help me. I am new at replacing valves. I am not sure if I have the correct valve?

Also could someone explain the current setup of the system I'm trying to replace?




Posts: 2,403

Location: USA


Friday, August 11th 2017, 10:58pm

The valves installed are better than the ones you want to replace them with. That's my opinion anyway.
Why are you replacing the valves? Are they malfunctioning? Could be they just need new diaphragms. Or you could buy new Hunter inlines and swap out all the parts.
The valve with the filter goes to a drip line most likely. I highly suggest that station's valve have a flow control.


Saturday, August 12th 2017, 9:20am

I was told by a repair guy to replace the valve or solenoid.

He said it was old.

Currently the sprinklers don't activate on the controller in this zone.

I have to manually turn the switch on the valve for it to come on.
Also I have excess drainage when its off on the last sprinkler. The lawn is on a hill.

The house is 15 years old. I purchased it 2 years ago and didn't have a problem until now



Posts: 2,403

Location: USA


Saturday, August 12th 2017, 2:23pm

Ok I looked at the picture again. That's going to be a tricky repair for you simply because of where the valves are located. You'll have to attach the valves on the outlet side first then rebuild the manifold. Usually you screw the valve onto the manifold then reattach the pipe on the outlet side. I'm not sure you'll be able to do that on the valve with the filter.
Here's what I'd do if i was you.

I'd open up the valves and inspect the seats to make sure they're not damaged. I say that because of the constant drainage. If they're in good shape, I'd leave the valve bodies in there and replace all the removable parts.
Here's your valve
So buy two of these and swap out the parts.


Sunday, August 13th 2017, 10:28am

Ok thanks,

I'll try what you just mentioned.


Sunday, August 20th 2017, 2:44pm


I received the 2 valves in the mail. Switched out all the removable parts and it works great.

Thanks again.

Rate this thread