You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

WALTER@BRADFORD

Starting Member

1

Wednesday, July 12th 2017, 11:53am

sprinklers and hot water in the house

When the sprinklers come on the hot water to the house is interrupted. I don't know if this is in your expertise, but I have a problem.
The hot water comes back after about 2 or3 minutes.
Thank you Walter

BackflowInspector

Supreme Member

Posts: 480

Location: Houston, Texas

2

Wednesday, July 12th 2017, 2:58pm

I am just going to open this up a little bit for the forum.
Please give us some more information, Is this a new sprinkler system?
How long have you been experiencing this?
What is your water Source?
Is there a backflow preventer installed on the sprinkler system?
Where is the water connection that supplies the irrigation system?
What city are you located in?

This should be a good start.
:thumbup: :thumbsup:
LI0006121, BPAT0011021, CI0009500

Wet_Boots

Supreme Member

Posts: 5,147

Location: Metro NYC

3

Thursday, July 13th 2017, 3:13pm

The sight-unseen general answer is that the indoor water pressure is dropping drastically when a zone opens, and this sets up a situation where the water heater is temporarily the point of highest pressure in all the house plumbing. This "pressure imbalance" can lead to water flowing backwards from heater to sprinkler system, which is generally connected closer to the water meter. As the zone pressure comes up to a higher point and stabilizes, the hot water can return to normal.

The simple remedy is to run the sprinkler system in the wee hours of the morning when nobody cares about hot water.

Rate this thread