You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

1

Sunday, August 7th 2016, 5:01pm

All 5 valves in the box not working, others are fine.

Hi all,

All 5 valves in this box all of a sudden stopped working (after getting rid of a bamboo root in it). But I can still manually turn it on by turning the solenoid or the bleeder. The controller still opens the other valves in a different box. Is it because of the wires got loosen? How to find out and how to fix please? I know nothing about sprinkler, just reading through old posts, but cannot find similar issue.

Thanks!

https://www.dropbox.com/s/skjkxvffs36lg6y/2016-08-07%2012.22.11.jpg?dl=0

mrfixit

Moderator

Posts: 1,994

Location: USA

2

Monday, August 8th 2016, 12:26am

You probably cut the wires. I've done more than once thinking the cable was a root. Backtrack the wire at the valves until you see where you cut it.
It sounds like you were cutting inside the box so that's probably where it is.

3

Monday, August 8th 2016, 1:02am

I didn't see any cut wires. But I will check more carefully tomorrow again.

Rate this thread