You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Mark C.

Unregistered

1

Tuesday, June 17th 2014, 7:55am

pulsing vibrations on newly installed drip zone

I recently installed a new drip zone on my system. when testing the zone it pulses and vibrates the pipes on the zone only. i have a hunter pgv valve with flow control and a hunter accu-sync 20psi pressure regulator installed on the valve. when the sprayers are spraying the water flow aslo pulsates

Wet_Boots

Supreme Member

Posts: 4,061

Location: Metro NYC

2

Tuesday, June 17th 2014, 9:17am

It's probably the regulator. These things can oscillate, in combination with the valve, often slowly enough up and down, that they call it "hunting." More pressure is usually the cure, but now that they have the fixed-pressure Accu-Sync, adjusting the pressure isn't an option, and other than trying a new diaphragm in the valve, assuming it's an older valve, there isn't any easy answer other than ditching the Accu-Sync in favor of a stand-alone pressure regulator.

Rate this thread