You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.


Active Member


Tuesday, June 12th 2007, 12:24pm

Missing zone

I replaced my old Rainbird controller with a Hunter Pro C. I think I'm really going to like this unit. I have 7 zones, and for some reason only 6 show up when I toggle through them to program. How can I track down this problem?



Posts: 2,188

Location: USA


Tuesday, June 12th 2007, 6:18pm

I have ran across 3 or 4 faulty Pro C's right out of the box. None of them had your symptom though. Also not for a few years. They may have fixed the problem. The obvious question is, did you install 2 three station modules or just one? It sounds like you only have 6 stations. Maybe you have one wire hooked up to the pump terminal thinking it's a zone.
I just remembered something. I believe if you install a module while the controller is plugged in then it wont recognise it. Try unplugging the controller, take out the modules and reinstall them. I'd take the back up battery out also just in case. Good luck!
If I can't fix it, it's broken!

Rate this thread