You are not logged in.

1

Tuesday, January 23rd 2007, 7:40am

Run comes on with controller turned off

One of the runs on my system comes on randomly with the control box turned off. Is the problem with the controller or the solinoid/valve?

HooKooDooKu

Supreme Member

2

Tuesday, January 23rd 2007, 11:20am

You should be able to answer that question by disconnecting the "common" wire from the controller. If that makes the problem go away, then that sounds like power is getting through the controller and activating the valve.

Assuming you have more than one valve, the other thing you can do to trouble shot the issue is to switch the wires the feed the two valves and see if the problem moves to a different valve.

3

Tuesday, January 23rd 2007, 11:55am

Thanks. I will give that a try before I dig up the yard looking for the valve.

Wet_Boots

Supreme Member

Posts: 4,078

Location: Metro NYC

4

Tuesday, January 23rd 2007, 1:02pm

A solid-state controller can just spazz out, and randomly activate zones. Brand name? Or home-center cheapo?

5

Thursday, January 25th 2007, 8:06am

It is a Richdel controller, but it is 16 years old and may be wearing out.

Wet_Boots

Supreme Member

Posts: 4,078

Location: Metro NYC

6

Thursday, January 25th 2007, 12:56pm

I've seen Richdels behave like that. Replace it.

Rate this thread