You are not logged in.

ram garcia

Starting Member

Posts: 1

Location: USA

1

Saturday, June 3rd 2006, 2:47pm

water valve control location

have 4 sprinklers that will not cut off..have gone through all 15 stations to turn off and have unplugged power to valves and they still continue to run...finally turned main control valve off and they stopped but as soon as I turn it back on they start up again...everthing points to the valve controlling these 4 sprinklers...my problem is locating the valve...I know it's in the ground (have located other boxes on sides and back of house)... sprinklers are in the same general area (40 ft square area). I've been poking around with a piece of rebar to see if I can locate it but no luck. Any other suggestions on how I might be able to find it?? thanx.....

xpedient

Active Member

Posts: 43

Location: USA

2

Sunday, June 25th 2006, 7:04pm

You can goto a rental store and rent a valve finder. It traces the current in the ground to the valve. once you find it the diaphragm needs to be replaced.
Xpedient Irrigation Inc. is a locally owned company that delivers solutions to all your sprinker system needs.
We service both residential and light commercial customers.

We offer: Complete installations
All types of Repairs
Summer start-ups
Evaluation of coverage
Troubleshooting
Pressure loss
Vacuum breaker repair
Drip/Low-Pressure Irrigation Installation and Repair
and Much More!

If you would like free consultation or advice for your property, please feel free to contact us with any questions!

Call or email us now to schedule your summer-start up!


http://www.highlandsranch.com/class/display.html?id=3537

Rate this thread