You are not logged in.

1

Saturday, April 22nd 2006, 9:25am

Weathermatic controller that won't turn off

I have a weathermatic controller and it now runs the system programs regardless of the fact that the valve power control is in the <b></b><b><b>off</b></b> position. It will run in automatic and manual mode in the off position. Is it time for a new controller and if so what recomendations can anyone make? I only have 6 zones and it is mounted indoors. I have replaced the pump starter solonoid.

Wet_Boots

Supreme Member

Posts: 4,076

Location: Metro NYC

2

Saturday, April 22nd 2006, 12:05pm

Reboot. Pull the plug, and remove any backup batteries.

3

Sunday, April 23rd 2006, 7:34am

I tried the reboot---even used the reset on the system--still the same. Any other ideas?

Wet_Boots

Supreme Member

Posts: 4,076

Location: Metro NYC

4

Sunday, April 23rd 2006, 7:57am

A new controller would be the simple way out. Diagnosing solid-state controller problems (beyond the obvious reboot/reset stuff) is a waste of time.

RidgeRun05

Supreme Member

Posts: 314

Location: USA

5

Sunday, April 23rd 2006, 2:31pm

Your best bet is to replace the controller with a quality one. You will spend just as much fixing this one, as you would on a decent new one. Stick with a quality name brand.
Tony Posey
Ridge Run Landscapes

6

Monday, April 24th 2006, 1:21pm

Thanks for the advice. Just ordered a new Weathermatic WMPLUS6--hope this fixes the problem---I'm sure it will all other components are functioning correctly.

Rate this thread