You are not logged in.

jerry

Starting Member

Posts: 1

Location: USA

1

Tuesday, January 3rd 2006, 9:20am

R-50, Rain curtain nozzles

I want to replace the standard long throw nozzles on Rain Bird R-50s with rain curtain nozzles. What is the difference between using a 1.5, 2.0, 3.0 configuration versus a 3.0, 4.0 6.0 cofiguration and which is preferable. There are 5 rotors per section and the water pressure is about 45 psi.

Wet_Boots

Supreme Member

Posts: 4,020

Location: Metro NYC

2

Tuesday, January 3rd 2006, 9:41am

Why bother? Adjusting the breakup screw on the nozzle can give you equivalent coverage. Besides, the two varieties of nozzles do not have the same flow rates. Now, if your 45 psi is the static supply pressure, and you have less that 30 psi at the heads themselves, then you can gain by making the switch, and taking the time to dismantle each head to readjust the stator settings, if changing nozzle sizes.

Rate this thread