You are not logged in.

quokka2

Unregistered

1

Wednesday, November 22nd 2017, 7:39pm

Delivery drop in bifurcated line

I have a shallow bore pumping to two tanks in opposite directions; one through 90y of 2" polypipe and the other through 150y of 1 1/2" polypipe, with only about 5m of static head from the bore water level. I expect about twice as much flow though the 2" pipe which is okay, as it is a bigger tank. Problem is, I get only about half the TOTAL flow when pumping to both tanks as I get when pumping to either of them individually. I thought I might have a vacuum problem in the T-piece where the lines diverge, so changed the pump from the centre socket to one of the ends, which made no difference. As my 9-stage pump is probably operating below its optimum pressure range, I choked off the delivery by closing the bore head tap a bit, which only reduced the flow further. Spent yesterday cleaning both lines, but they weren't particularly dirty and it made no change. What to do, folks?

Wet_Boots

Supreme Member

Posts: 5,144

Location: Metro NYC

2

Thursday, November 23rd 2017, 8:08am

First thing you do is run the numbers. Turn your situation into a math problem and do the math.

Rate this thread