You are not logged in.

1

Saturday, July 12th 2014, 12:56pm

Replacement for Hunter MP3000

The development I live in has used Hunter for close to 25,000 homes using reclaimed water and very sandy soil. In my yard they put in MP3000 facing my Lanai (glassed in porch) and the heads are 26' away. They do fine with no wind, which never happens, its always windy and my windows are covered in recycled water from the ground up to usually 6' high. Yes, I have them turned down and I did try the MP2000 and they don't do the job.

I only need to reach 22' (which is minus the 4' of mulch and plants). This zone has 8 rotors and I will only be replacing 4 of them, leaving the other MP3000s.
I am thinking about using the PGJ-04 Pop-Up adjustable Arc rotor with 15'-37' radius as a replacement or PGP-04-CV-R pop-up for reclaimed water.

The MP3000 uses a 20 mesh screen is this a problem with the PGP-04, although in the 2 years with this setup I have not had to clean out the filters.

mrfixit

Moderator

Posts: 1,447

Location: USA

2

Saturday, July 12th 2014, 3:38pm

Maybe you could just swap out the MP's for Rainbird's Rotary nozzle.
The streams of water are thicker than the MP's so will be less susceptible to wind.
I think the Rainbird nozzle uses a bit more water than the MP3000 but don't quote me on that.
You could always swap out all the nozzles so they match.
The Rainbirds go up to 24 feet which is what you're looking for.
Rainbird Rotary Nozzle

3

Sunday, July 13th 2014, 11:19am

RE: Replacement for Hunter MP3000

The development I live in has used Hunter for close to 25,000 homes using reclaimed water and very sandy soil. In my yard they put in MP3000 facing my Lanai (glassed in porch) and the heads are 26' away. They do fine with no wind, which never happens, its always windy and my windows are covered in recycled water from the ground up to usually 6' high. Yes, I have them turned down and I did try the MP2000 and they don't do the job.

I only need to reach 22' (which is minus the 4' of mulch and plants). This zone has 8 rotors and I will only be replacing 4 of them, leaving the other MP3000s.
I am thinking about using the PGJ-04 Pop-Up adjustable Arc rotor with 15'-37' radius as a replacement or PGP-04-CV-R pop-up for reclaimed water.

The MP3000 uses a 20 mesh screen is this a problem with the PGP-04, although in the 2 years with this setup I have not had to clean out the filters.
Thanks, I'll try the Rainbird this week...

4

Tuesday, July 22nd 2014, 11:22am

RE: RE: Replacement for Hunter MP3000

The development I live in has used Hunter for close to 25,000 homes using reclaimed water and very sandy soil. In my yard they put in MP3000 facing my Lanai (glassed in porch) and the heads are 26' away. They do fine with no wind, which never happens, its always windy and my windows are covered in recycled water from the ground up to usually 6' high. Yes, I have them turned down and I did try the MP2000 and they don't do the job.

I only need to reach 22' (which is minus the 4' of mulch and plants). This zone has 8 rotors and I will only be replacing 4 of them, leaving the other MP3000s.
I am thinking about using the PGJ-04 Pop-Up adjustable Arc rotor with 15'-37' radius as a replacement or PGP-04-CV-R pop-up for reclaimed water.

The MP3000 uses a 20 mesh screen is this a problem with the PGP-04, although in the 2 years with this setup I have not had to clean out the filters.

Thanks, I'll try the Rainbird this week...
Got the R17-24H Rotary Nozzles and can't find a video on how to adjust.

5

Yesterday, 6:54pm

Looking for a video on how to adjust the RainBird Nozzles.

Got the R17-24H Rotary Nozzles and can't find a video on how to adjust.

mrfixit

Moderator

Posts: 1,447

Location: USA

Rate this thread