You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

1

Monday, May 6th 2013, 9:17am

Locate a broken irrigation line

I recently removed several trees from my backyard and ground 2 stumps. When I turned on a manual test of the zone all 6 rainbird heads popped and a light spray came from all heads. When I checked the pressure at the pump it was outputting 20-25psi. Normally, the output is between 40-50psi for this zone. I know I have a leak somewhere but locating it is a problem. Running the zone then looking for a puddle area leaves me with a wet backyard and no telltale puddle/bubble area. I ran the zone for about 10 minutes. Should I cap off all the rainbird heads and run the zone? Any recommendations?

Wet_Boots

Supreme Member

Posts: 4,072

Location: Metro NYC

2

Monday, May 6th 2013, 9:47am

capping off heads = good idea

Rate this thread