You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

eshara55

Unregistered

1

Saturday, October 6th 2012, 10:28am

Head Placement

So I have a question on head placement... I have 45psi static pressure,
3/4 main service line, tapped off main with all 1" pipe/backflow
preventer/valves.



I have one zone that has minimal grade change with only a short distance from the valve. The lawn is a 40'x32'.



My though was to just use (4) Rainbird 5000 Series in the corners spraying quarter circles.



If I can get a 32' spray I should have head to head coverage on way and almost head to head the opposite way??



Thanks for your help!!!

Wet_Boots

Supreme Member

Posts: 4,059

Location: Metro NYC

2

Sunday, October 7th 2012, 9:37am

You could always use a swing joint under each head, and place them slightly off vertical, so each head coverage pattern becomes a partial ellipse, instead of a part circle.

valovic

New Member

3

Saturday, January 12th 2013, 6:45pm

With 45 psi and only running 4 heads, there is no need to go with 1" lines and valves. Just go all 3/4", and save some coin. YOu will still have the option of changin the nozzles if you need more distance.

Rate this thread