You are not logged in.


Starting Member


Sunday, April 15th 2012, 9:02pm

24 Zone controller Reading " FUSE" ??

My controller (Irrotrol) is not working at present. It just flashes "FUSE" As I did not find a fuse under the inspection panel, what Fuse would I replace, repair or ????

This post has been edited 1 times, last edit by "oldcarman" (Apr 15th 2012, 10:01pm)


Supreme Member

Posts: 4,820

Location: Metro NYC


Monday, April 16th 2012, 4:26am

Look for a bad (short-circuited) solenoid


Monday, April 16th 2012, 8:20am

Can you give us a make/model of the controller?



Posts: 1,747

Location: USA


Monday, April 16th 2012, 4:00pm

You may not have a fuse. It's just a warning. If you do have a fuse then you'll need to replace it.
Reset the controller. Just unplug it. Take out the back up battery. Run the stations until you see which numbered station causes the "fuse" warning.
Find that valve and disconnect one of the wires from the solenoid. Now run the controller again. If there's no warning change the solenoid as Boots suggested. If not it's a wiring issue.

Rate this thread