You are not logged in.

daltex

Starting Member

1

Friday, April 6th 2012, 6:57pm

Imperial, Valet timer problem

I have a 6 station Imperial Valet timer that periodically hangs up at station 4. I manually recycle the timer to station 4 and then it turns on. What is causing this problem. Thanks for your help.
Daltex

Wet_Boots

Supreme Member

Posts: 4,077

Location: Metro NYC

2

Friday, April 6th 2012, 11:17pm

dirty/worn/corroded wafer switch contacts

mrfixit

Moderator

Posts: 1,460

Location: USA

3

Saturday, April 7th 2012, 4:01am

Open it up and look at the number 4 dial from the inside. See if it's bent or loose.

Wet_Boots

Supreme Member

Posts: 4,077

Location: Metro NYC

4

Saturday, April 7th 2012, 9:41am

The workaround is to assign the current zone four to another currently unused zone.

Also, for the sake of building the knowledge base, time this hang-up period for a few controller cycles.

Rate this thread