You are not logged in.

ddeferra

New Member

1

Tuesday, June 7th 2011, 10:46pm

Hunter SRC Controller Locked in Off Mode

I have a Hunter SRC controller. It worked last summer and over the winter when I went to turn it on the read-out only was in the Off mode. I can not program anything on the controller. I've tried to unplug it and then plug it back in without any change.

mrfixit

Moderator

Posts: 1,464

Location: USA

2

Wednesday, June 8th 2011, 2:05am

Did you take the back up battery out when you unplugged it?

---

This came out of the manual for the SRC Plus. lol at the size of the font. Best I could do.

Clearing the Controller's Memory/ Resetting the Controller

If you feel you have misprogrammed the controller, there is a process

that will reset the memory to factory defaults and erase all programs and

data that has been entered into the controller.

1. Press and hold down the , and buttons.

2. Press and release the reset button in the lower wiring compartment.

3. Release the , and buttons. The display should now show

12:00AM. All the memory has been cleared and the controller may

now be reprogrammed.

This post has been edited 1 times, last edit by "mrfixit" (Jun 8th 2011, 2:19am)


ddeferra

New Member

3

Wednesday, June 8th 2011, 6:29pm

Hunter SRC Controller Locked in Off Mode

Mrfixit thanks for your help. It worked and my system is now running!

Similar threads

Rate this thread