You are not logged in.


Starting Member


Monday, March 28th 2011, 7:16pm

1.5 HP pump, 1" zone line and 6 falcon heads

I have a 1.5 HP pump and the gauge at the pump reads 90 psi. I have a large, open lawn area, which would take 72 Rainbird 5000 heads v/s 28 Rainbird 6504 heads. How do I know for sure that I can run (6) Rainbird Falcon 6504 rotors (with the 2.9 gpm nozzles, or next size up) per zone? I was planning on comming off of the 1.25" main line and using 1" zone line having 6 Falcons per zone. Should I use 1.25 zone, with 1.25 valves? I just wanna be certain because the materials will be delivered from approx 50 miles away. Thank You, - Andy


Supreme Member

Posts: 5,269

Location: Metro NYC


Tuesday, March 29th 2011, 8:18am

How about you turn on the pump and take combined flow-and-pressure measurements? This is entirely in your hands.


As far as sprinklers go, it may be that the best bang for your buck will be from Hunter PGP heads with their largest nozzles.


But test your water supply first. Then figure what sprinkler heads it can operate.

Rate this thread