You are not logged in.

wxperson

New Member

1

Thursday, September 9th 2010, 3:36pm

SAM pop up sprinker to stop "seeping"?

Hi,

I purchased a Rainbird SAM 1800 pop up with the intent to stop an irrigation pop up station from seeping . It is the lowest irrigation pop up on the zone.

Unfortunately, it did not correct the problem.

What could I try next?
wxperson has attached the following file:
  • photo.JPG (18.09 kB - 2 times downloaded - Last download: Jun 5th 2012, 3:31pm)

mrfixit

Moderator

Posts: 1,418

Location: USA

2

Thursday, September 9th 2010, 4:08pm

There's obviously something wrong with that SAM. Perhaps the rubber washer is missing where it seals. Could be debris in the sprinkler. Could be a 1804? with a SAM cap on it. Could be the only working head on the line?
--
None the less there's still a problem. If that seeping is 24 hours a day you have a problem with the valve on that zone.
Most likely the diaphragm or seat washer needs replacing. It might have debris stuck in it. It might be loose.
It could be a hairline crack in the valve seat.
The solenoid might be a tad loose.
If I knew which valve you have I might be able to give specifics.

Posts: 36

Location: Southampton, NY

3

Wednesday, November 17th 2010, 1:20pm

weeping valve

I would guess that you have a valve that is not sealing all the way. Either that or you are on the bottom of a hill with the head.



www.irrigationsolutions.com

Rate this thread