You are not logged in.

1

Tuesday, August 10th 2010, 9:21am

Where to position spray head?

I am designing and installing an irrigation system for a client and there is a 15 foot strip of grass between the side of their house and the property line/fence. It is about 25 feet long. They want all spray heads and the customer is always right. I am getting 17' radius Hunter PS Heads, and my question is, should I put the heads in the middle of the strip and have them set on a 360° spray, or up against the house with 180°, aimed toward the property line. I do not think there is a possibility of mold growing on the house with the 360° spray, as the side the strip is on faces east. What do you all think?
Промывать Стратегически

hi.todd

Supreme Member

Posts: 412

Location: Houston, Texas

2

Tuesday, August 10th 2010, 11:51am

Not a good idea to put water on the house mold or not.

I would put the heads on the perimeter of the house spraying out towards the property and away from the house.



:thumbup: :thumbsup:
:thumbup: :thumbsup:

Central Irrigation

Supreme Member

Posts: 349

Location: Central Minnesota

3

Tuesday, August 10th 2010, 7:13pm

Ditto what Hi Todd said. Keep water off the house! Keep your spacing of the heads closer to 15' to avoid any gaps in coverage.

Fireguy97

Advanced Member

Posts: 77

Location: Kamloops, In Beautiful British Columbia

4

Friday, August 13th 2010, 12:50am

Exactly what Todd and Central have already said. Never spray towards a house. Head-to-head coverage spraying away from the house.

Mick
Irrigation Contractor

Certified Backflow Assembly Tester

Rate this thread