You are not logged in.

Search results

Search results 1-20 of 33.

Wednesday, November 17th 2010, 1:22pm

Author: irrigation solutions

My Website

I just wanted to get some feedback on our site. It also has a FAQ section that may interest some people with irrigation questions. Any feedback would be very helpful...thanks

Wednesday, November 17th 2010, 1:20pm

Author: irrigation solutions

weeping valve

I would guess that you have a valve that is not sealing all the way. Either that or you are on the bottom of a hill with the head.

Wednesday, November 17th 2010, 1:16pm

Author: irrigation solutions

Thats funny

You were really putting the tiny metal end in the big plastic opening???? LOL

Wednesday, November 17th 2010, 1:14pm

Author: irrigation solutions

Why not do drip

For what you are looking for, Drip (Netafim) is the way to go

Wednesday, November 17th 2010, 1:09pm

Author: irrigation solutions

why would you want to?

Why would you want to go with two controllers...just more of a chance of the clocks overlapping and not watering with the proper pressure. Also, if you need a rain-sensor or a matre valve, now you need two. JMHO

Tuesday, March 24th 2009, 4:13pm

Author: irrigation solutions

I would like some of you to check my website

Can some people give me feedback on my site. It is Give me all the feedback you can...It would help me alot. Thanks, joe

Tuesday, March 24th 2009, 4:11pm

Author: irrigation solutions


Yes it will wor, 3/4 inch pipe is fine, you need 8 male adaptors to het the pvc connected to the heads, which are 1/2 inch female and you can get the parts anywhere...hope this helps

Sunday, March 22nd 2009, 12:20pm

Author: irrigation solutions

Help with my site.

I would love for some of you to check out my site and give me the good, bad and ugly. Its located @ Thank you for all your help. Let me know what you think. Joe

Sunday, March 22nd 2009, 10:11am

Author: irrigation solutions

turn off the clock and start over

Reset the clock and go to you can downlaod a manual on how to use the clock because maybe you have the wrong one. Then re-program it and let it work. Good luck Http://

Sunday, March 22nd 2009, 10:06am

Author: irrigation solutions

Our wesite has

Information to the raindial. Go to... Hope this helps...

Sunday, March 22nd 2009, 10:04am

Author: irrigation solutions

need to wait!!

You want to see exactly where everything is going to be before installing a system. This is the only way to go!!

Thursday, March 19th 2009, 3:25pm

Author: irrigation solutions

when its cold...

you should leave it plugged in, in the off position. Not good to leave the clock off when its that cold.

Thursday, March 19th 2009, 3:22pm

Author: irrigation solutions

almost all

The clocks online are all out of date. They carry no warrenty. Hopes this helps. Joe

Wednesday, March 11th 2009, 2:02pm

Author: irrigation solutions

your system is..

Your system is asking for too much water and too fast. You should renovate it using a pro. Good luck

Wednesday, March 11th 2009, 2:00pm

Author: irrigation solutions

I may Be the wrong person to answer...

As a contractor, I would always recommend having a pro do it. There are alot of little things like adjustments that need to be done. Timing, opening the water supply slow, are a few more. For the hundred dollars or so it costs, it is well worth it. If a plant dies or a piece of grass dies, what does that cost. Leave it to the pros. Just my thought.

Friday, February 27th 2009, 12:25pm

Author: irrigation solutions

you need a wire toner

Get one or hire a professional contractor to find them for you.

Friday, February 27th 2009, 12:20pm

Author: irrigation solutions

You probably have weak pressure.

I would not put more than 3 heads on a zone. Some places with small property have 20 zones to do the job right. You can drill a well and probably get better water.

Friday, February 27th 2009, 12:18pm

Author: irrigation solutions

on the charts...

There really is no difference of pressure loss with oinly 12 gpm. It it very minor and not worth the money unless you are going over 50 feet to get where you have to go.

Friday, February 27th 2009, 12:16pm

Author: irrigation solutions


Junk in the valve or just a faulty valve. Change it and use an irritrol 2400 if you can. good luck

Friday, February 27th 2009, 12:14pm

Author: irrigation solutions

i have even seen

The remote work 1000 feet in an open field on an outside controller. These things have some range.