You are not logged in.

Search results

Search results 1-2 of 2.

Sunday, January 10th 2016, 10:53am

Author: Lynrdbr

Dog tore open Control Valve box and pulled all wires, now not working properly

Quoted from "Capitalsprinkler" Check the timer and see if the master valve has a wire to it. disconnect that and see if your zone stops. A master valve runs when any of the stations are active. OK, thank you so much for your reply, I do have a master control valve wire in timer box. So I take it that that zone is the master zone. So if I close that valve to the off position, will that make it so that zone will only work when it is suppose to? (like only go off went zone 4 is directed to work?) ...

Saturday, January 9th 2016, 5:46pm

Author: Lynrdbr

Dog tore open Control Valve box and pulled all wires, now not working properly

So my 1 yr big puppy, got into the control valve box and pulled everything apart. It is just one valve located in there. There are 2 white wires, 1 red, and 2 black wires from the solenoid. So doing a little research i figured the 2 white wires were common wires and the red was the control wire. So i hooked up 2 whites to one black (Valve) together and then one red to one black (Valve) together. The sprinkler system works but.... One zone comes on all the time during the testing of the different...