You are not logged in.

Search results

Search results 1-3 of 3.

Tuesday, May 27th 2014, 4:53pm

Author: marian

RE: "Flashing 24V" problem - fixed!

Additional hint for DIY: - Be careful when removing old capacitors. The PCB is sensitive for overheating and you may easily break the conductivity of through-holes. It is recommended to let a small gap between capacitor and PCB and solder the capacitor also from PCB top side... - Since the big resistor near the capacitors is quite hot during operation, bent the components a little bit apart...

Monday, September 2nd 2013, 5:37pm

Author: marian

"24V error" - fixed

Hi everybody. I had the problem with blinking 24V indication too. The fix is quite easy - See my comment in this thread -> Problem with Irritrol Jr Max Marian

Monday, September 2nd 2013, 5:33pm

Author: marian

"Flashing 24V" problem - fixed!

Hi everybody. I had the problem with blinking 24V indication too. The fix is quite easy - change all 3 electrolytic capacitors: C8 - 470M/16V 85 °C -> 470M/16V 105 °C C7 - 220M/50V 85 °C -> 220M/63V 105 °C C9 - 100M/16V 85 °C -> 100M/16V 105 °C All of them are undervalued from temperature point of view and one also from voltage point of view. I have already repaired lot of them (>30pcs) with 100% success. The affected models are mainly Irritrol Junior MAX * and sometimes also Toro DD *. Do not c...