You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5096 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 6 posts

Wednesday, June 8th 2005, 5:49pm

by RidgeRun05

Correct, the controller will not allow you to water more than one zone at a time. I highly doubt the pressure would be available for it either.

Wednesday, June 8th 2005, 2:13pm

by Wet_Boots

One zone at a time, please. Overlapping programs get 'stacked' and run later on.

Wednesday, June 8th 2005, 6:00am

by alui

I have the Hunter 300 controller controlling 8 zones. Is it possible to program it so that 2 zones can be turned on simultaneously? For example, I tried putting zone 1 in program A w/ a start time @ 6:30am, and zone 5 in program B w/ the same start time @ 6:30am. However, it seems only program A (zone 1) gets run, and program B (zone 5) is skipped.

Thanks in advance

Friday, May 27th 2005, 7:47am

by mburnickas

jbbnet- nestors is correct. I planted a new lawn in my back and I have 2 programs.

A has zones 1,2,3,4 come on at 5:45 am <b> every other </b> day
B comes on every day, 2 times per day; <b> only zones 4 & 5 </b>

Thursday, December 9th 2004, 8:26am

by nestors

You need to have all your regular time on program A
then any other timing on Program B with just the zones you want to come on , and there is still program C to use as well .

If you do not want zones 5 & 6 to come on at all then go to all the programs A,B,C and zero out the minutes on the zones

Nestor's Sprinklers & Lighting

Thursday, August 19th 2004, 5:37pm

by jbbnet

how to skip zones, Hunter Pro C Controller

I have a Hunter ProC controller and i was trying to skip watering certain zones by setting the time in those zones to 0 minutes (zones 5-6) and continue water zones 7-9 at 20 minutes.

Why do zones 5-6 continue to water if i set them to 0 minutes? How can i skip zones? It seems to continue to 20 minutes in the zones (5-6) i set to zero minutes.