You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5122 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Friday, June 11th 2004, 1:38pm

by bobw

Well, sounds like you checked the most likely candidates. Take a good look at the body and cap of the valve itself. Even a hair thin crack will cause a valve to weep. Also, make sure the valve is screwed together tightly. My experience with old Hardie valves is limited, but consistently unpleasant....

Friday, June 11th 2004, 11:49am

by IdaSpode

Sprinkler weeps w/valve off

Old system, Hardie electric valves. One station weeps water after the valve has closed.

I've installed a new diaphragm kit, exchanged the solenoid with a known good one, the interior of the valve is clean, the seat for the solenoid is not marred, the station comes on and shuts off correctly with the timer.

What could it be?

djones <at>