You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5128 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Thursday, June 3rd 2004, 2:05pm

by mrwettech

I checked with Sprinkler Warehouse first and I did not see it in their product line. If I missed it I am sorry SW. I do not wish to redirect business from SW but, after price checking I feel they still beat the list price on most products. You can get a Doubler at Once again, I am sorry if SW carries this product.

Wednesday, June 2nd 2004, 5:51pm

by dhoang

were can i find a "doubler"

Wednesday, June 2nd 2004, 5:39pm

by mrwettech

There is a device called a "doubler". It works great in a situation as you described. It acts like a train track switch. You wire this device to the one good field wire and then to the two valves. The only thing to keep in mind is that the device must go to rest between those two zone runs. This is usually achieved by running another zone run between those two or with a time delay between zones. Also, you just need to run a jumper wire in the controller between your selected zone terminals. It is very easy to install and it works great in a situation like yours. I hope that helps.

Wednesday, June 2nd 2004, 2:53pm

by dhoang

wiring problem

some one did a repair and wired two zones together, and now there is not enough pressure for the system to work. are there any alternatives to running a new wire to one of the zones. The previous wire was cut.