You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 464 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Tuesday, August 20th 2013, 1:50pm

by Wet_Boots

If the side area is 20 feet wide, then you can work out an arrangement with heads on the outside edges of the space. Here, you don't have to have head-to-head spacing. Something closer to a triangular spacing will emerge, when you start with a 15-foot head in the back corner, and work from there.

Tuesday, August 20th 2013, 12:10pm

by janda.m

ok

but i want to know if it is wise and acceptable to put spray sprinklers in the middle in the line or to put them on the side which is not good option cuz the place ist wider than a max distance of sprinkler...it is 19,6 ft wide

Tuesday, August 20th 2013, 9:53am

by Wet_Boots

You should work up a design with all rotors, covering everything, just for comparison.

Tuesday, August 20th 2013, 9:27am

by janda.m

opinions on design

here is my sketch (static pressure 5 bar and 16 GPM)...after couple of hints i decided to put in the front of my house which is 42ft wide and 36 long 4 pgj or pgp ultras in two zones (for the case of some ,,correction┬┤┬┤ of the irrigation system and putting more sprinklers if needed)...but now i need your opinions how to solve my section on the side and in the back of house...I want to put in the middle PS ultras ...i dont care if there is half meter no coverage cuz its not in the center...the back of the garden is relatively wet and shadow place and dont need so much watering as the rest...sorry for my english.. I am from east europe... :)
http://2i.sk/0811e3c91a