You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2056 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Friday, November 2nd 2012, 7:07pm

by Wet_Boots

You would have to do a flow test to be sure of anything. Have you checked the pipe with a magnet, to make certain it isn't steel?

Friday, November 2nd 2012, 11:31am

by BethieBoo (Guest)

1/2" pipe to/from meter

I have a 1/2" lead pipe running from the city water supply to my meter, and I think a 1/2"lead pipe running from the meter to my house. It is very expensive to have the city either run a separate meter for the sprinkler or replace the existing meter with larger pipe. Will a sprinkler system work with this configuration? Thanks!