You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2314 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Thursday, August 9th 2012, 2:35pm

by GatorGuy

8 gpm is less that 1psi loss.
Figuring all this on a 1" line.
Bigger lines take a minimum of 10gpm to work.

Not knowing other details I'd go with it.

Thursday, August 9th 2012, 1:32pm

by wsommariva

So at 8 GPM I may not lose any psi.

Is this a "can't hurt" situation in my case?

Yes the blog is a must read.

Thursday, August 9th 2012, 12:05pm

by GatorGuy

I always get so proud when someone reads something I wrote. :D
They have a very rough psi loss chart.
For a 1" filter highest flow they show on the chart is 40gpm.
Lose 9psi at 40gpm, 5 psi at 30gpm, 2psi at 20gpm.

Thursday, August 9th 2012, 11:42am

by wsommariva

T style filters

Hi everyone,

Just read the blog about filters and got me thinking.

I have city water. It comes from city wells. Every few months we get a rush of dark brown water from the city. I'm not sure what it is, could be iron. I have a whole house pre filter and the white filter element turns black after a couple of weeks!!

Sooo, Should I install one of those Vu flow units?

If so, I'm guessing 100 micron mesh. Installed after the PVB above ground.

Will it affect my psi and gpm which is naturally low?