You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1307 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Sunday, March 27th 2011, 7:42am

by Wet_Boots

You may even have to consider replacing the GFI the controller is powered from. Obviously, in the old days, sprinlker controllers might not have any connection to ground, so they never created worries about tripping GFIs

Saturday, March 26th 2011, 9:10am

by joel323

would this happen even if the system was not operating

would this happen even if the system was not operating it never happens when the system is running just in the middle of the night I do not know much about it but I would have thought the outside wire would only carry current when the system was operating

Saturday, March 26th 2011, 9:07am

by Wet_Boots

There could be a current leak to ground in the outdoor wiring. Do some resistance measuring, and fix any wiring faults, before other solutions are considered.

Saturday, March 26th 2011, 8:47am

by joel323

Problems with ground fault

I have a rainbird controller with hunter valves with 3 zones my system would work manually but not on automatic it would trip the ground fault every night when I plug it in to a non ground fault outlet it blew the internal fuse in the controller so I replaced the controller and that seem to fix it it works both manually and automatically but it still intermittently trips the ground fault but only at night when the system is not running I now have it plugged into a non ground fault plug and so far it has not tripped the internal reset I have checked the ground fault with other plug ins and it seems to be fine it has not tripped with anything else also I have a rain switch in the system but cannot see how that could cause the ground fault to trip anybody have any ideas