You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2841 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Monday, February 28th 2011, 11:33am

by Wet_Boots

Monday, February 28th 2011, 11:19am

by jimmyjames

Hunter PGP Adjustment

I would like to adjust the spray range of a Hunter PGP Sprinkler Head. It is now set for a 180 degree fan spray range, and I would like to change it to a 90 degree range. Do I have to change the head, or can it change the settings on the head I have now. I see an adjustment screw over the hole where the water sprays out of the head, and I assume it is for adjusting the length of the spray away from the spray head. I also see another hole in the top of the spray head, it may be a hole for a hex key. Maybe this is a way to control the degree of the "fan" the water will spray from left to right and back again.