You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1935 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Sunday, May 10th 2009, 1:13pm

by mrfixit

Start time

Having one RainDial go bad in 6 years doesn't happen often. Two would surprise me but it's possible.

Double check your start time on the B program. First make sure you have one, second make sure it's not the exact same time as program A or C.

You may want to consider unplugging the controller and taking out the back up battery for a few minutes then reprogramming.

There might be an erase program option. Page 28.

http://www.evergreensprinklers.com/documents/manual_raindial07.pdf

Sunday, May 10th 2009, 12:02pm

by kenball27

irritrol rd 600 ext

Since your May 1st reply I have replaced two selenoids and they all turn off properly. The controller has two stations on section A, one on section B, and two on section C. Everything works except section B. I can turn it on with semi-automatic , but it will not respond to automatic programming-will not turn on or off. It has a new backup battery and is wired to a breaker switch in the electric box. Is it time for my third Irritrol in 6 years? Thank You

Friday, May 1st 2009, 8:41pm

by mrfixit

Disconnect wire

Disconnect the station wire leading to the valve that wont shut off. Or unplug the controller. If the valve shuts off then the controller was telling it to stay on. Otherwise the valve needs adjustment or repair.

Friday, May 1st 2009, 1:01pm

by kenball27 (Guest)

Irritrol RD 600 EXT

One of my stations hasn't been working for the longest time. Now one station will not shut off. This is the second unit in 6 years. Is it the controller? I have replaced the valve off/on valves also. Do these controllers have any warranty?