You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The first post

Friday, September 21st 2018, 6:45pm

by PerryNZ

Irritrol TC 12 Rain or RUN - LCD stays on Rain/OFF

I've just finished re-programming the controller for the summer watering season in New Zealand. After clipping the control module back into the unit and re-connecting the ribbon cable, I find that the LCD display remains unchanged when switching back and forth between the RUN & RAIN-OFF positions on the control module. I manually ran a Single Station and that worked O.K. I.e. the control module is operating at least one station valve.

In both the RUN & RAIN-OFF positions, the control module display is the same: OFF/RAIN/DAY/1

What have I done wrong?