You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Wednesday, July 4th 2018, 7:59pm

by RichMoney

All backflows should be 1/4" threads, some of them do have flared fittings in front of the test cocks, but those can be removed. Like these here.
Simply unscrew them out of the test cock and then you can screw in a pressure guage, no need for fancy fittings most guages are standard with 1/4" pipe threads.

Friday, June 22nd 2018, 10:26am

by Wet_Boots

try 1/4-inch

Thursday, June 21st 2018, 9:34pm

by dynamite

Fittings for testing pressure on backflow

My system runs from the water meter to pressure regulator to the backflow preventer. I'd like to test the pressure after the backflow preventer so that I know what pressure is feeding into the system, but I'm not sure which fittings I need to do so. The test cocks look like 1/8" male flare, but the 1/8" flare fitting I tried didn't seem to fit.

What is the recommended way / fittings / pressure guage to test the pressure from a test cock?