You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4080 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Tuesday, June 12th 2007, 6:18pm

by mrfixit

I have ran across 3 or 4 faulty Pro C's right out of the box. None of them had your symptom though. Also not for a few years. They may have fixed the problem. The obvious question is, did you install 2 three station modules or just one? It sounds like you only have 6 stations. Maybe you have one wire hooked up to the pump terminal thinking it's a zone.
I just remembered something. I believe if you install a module while the controller is plugged in then it wont recognise it. Try unplugging the controller, take out the modules and reinstall them. I'd take the back up battery out also just in case. Good luck!

Tuesday, June 12th 2007, 12:24pm

by macminn

Missing zone

I replaced my old Rainbird controller with a Hunter Pro C. I think I'm really going to like this unit. I have 7 zones, and for some reason only 6 show up when I toggle through them to program. How can I track down this problem?