You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 378 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Tuesday, April 10th 2018, 2:28pm

by mrfixit

Water can't get to the sprinkler head unless it gets past the valve. The valve has an internal leak so it comes out the lowest point on the line. You capped off the lowest point so now it's coming out of the second lowest point.
Figure out which valve it is and replace or repair it.

Tuesday, April 10th 2018, 2:12pm

by VPortesi

Leaking Head

I noticed one of my sprinkler heads was leaking pretty bad so I capped it off. A few days later I finally bought a new sprinkler but before I installed it, I noticed that now two other heads were leaking. I replaced the sprinkler but the new one began to leak and the other two that were leaking now stopped. I don't understand why the new sprinkler is leaking.