You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 498 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Thursday, August 3rd 2017, 10:21pm

by Wet_Boots

Try an intermediate fitting, so the head isn't resting directly on whatever you have that is breaking.

Commonly used for sprinkler heads is the Marlex Elbow


Thursday, August 3rd 2017, 10:43am

by robertleegrant

Rainbird T-Connectors Broken Again!

Hi Guys,
I installed a Rainbird 32ETI system in my yard. We have a ton of clay in my area and the yard swells and changes constantly. As a result, the sprinkler heads will be too high one day, and underground the next. I installed concrete doughnuts around the sprinkler heads, and it is amazing how they can sink down into the yard and almost disappear.
My problem is that every few months or so the sprinklers fail. I dig up the sprinkler head and I will inevitably find that the plastic t-connector that fits into the bottom on the sprinkler is broken in half. My theory is that either the yard guys or the Tru-green guys are driving over the sprinkler heads and the equipment drives the head down, crushing the t-connector against the rock hard clay below.
Obviously, the concrete doughnuts aren't cutting it in terms of protecting the sprinkler. Isn't there some way to shore up the t-connector. Pad it? Replace it with foot-thick steel? Anyone else having the Rainbird plastic connectors fail? I am so tired of replacing these darn things that I'm almost ready to shell out the thousands to have a pro system put in. Just cause I give up. Almost. I'm stubborn.
Thanks for the assist!
R