You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4678 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Thursday, March 30th 2006, 4:32pm

by lush96

probably debris in the valve due to the fact the filter is no longer doing its job. could also be a "bleeder" open on the valve. what kind of filter do you have??????

Thursday, March 30th 2006, 2:45am



My sprinkler sytem is fed from the lake. I have a filter at the lake side which appears to be very dirty. I can't get the filter casing to turn so I can clean or replace the filter. Is there a special tool? Also, I started up my system and one zone seem to have a valve stuck and runs until I turn off the pump. Does this mean I might have debris in the valve?

Thank you for your help.