You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1456 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Saturday, July 26th 2014, 5:16pm

by Wet_Boots

Sounds like you need more work on the zone valves. Some systems reach a point where valves will fail one after another (almost always due to bad diaphragms)

Saturday, July 26th 2014, 6:35am

by Augy123

Water running when system is off and no zones pop up to spray when turned on.

We recently moved into a home with an irrigation system with 11 zones. We had a service come out and get everthing turned up (after winter) and make sure all was in working order. They did replace a valve and/or solenoid but otherwise everything looked good and we've been running it for the past few months. The other day I noticed the water pressure in the shower was low. Upon investigation I could hear water running through the irrigation supply line even though the system was off (it had finished its cycle earlier that morning).

If I turn on the water supply and try to run a zone (any zone), it won't work...the pump runs but no sprinkler heads pop up. If I just leave the water supply on but don't run a zone, there are a couple of zones that dribble water. This makes me suspect there is a valve not shutting. I don't know why, though, several zones would leak and not just one single zone if they all have their own valve. Can anyone shed some light on this?