You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5096 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Sunday, May 8th 2005, 4:18pm

by RidgeRun05

That 1/2" line is standard for indoor plumbing as far as sinks, showers, and outside faucets go...and a 1/2" line is not going to cut it for a sprinkler system, If you are going through the effort of installing a sprinkler system, I would make sure you do it right, which probably means running a line around the house.

Tuesday, May 3rd 2005, 7:43pm

by coorsflash

Should I even bother installing a system

Here's the deal, I have a relatively small back yard. about 700 square feet, broken up by a brick patio. I am just about to put down all new sod and am thinking about putting in a small sprinkler system. Here's the dilema. The main comes in all the way on the other side of the house so I don't want to have to run piping all the way around the house and on the inside the piping is 3/4" off the meter but then gets reduced to 1/2" pipes, [?], why I don't know. I have a hose bib running out to the back yard and would like to tap into that if possible. My question is since it's not a large area I'm looking to water (maybe 2 sprinkler heads) do you think I'd have enough pressure to make this work or is it not worth the effort. I'm kind of new at this so I hope I left enough info. Any help would be greatly appreciated.