You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2749 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 7 posts

Monday, May 14th 2007, 8:49pm

by lush96

the company has been around for 35. i have been involved in it for 16. and im sorry sprinklerguy but i getted pissed off when i read all this wrong advice. so i feel the need to make people aware of lousy advice.

Sunday, May 13th 2007, 6:07am

by SprinklerGuy

Is it 16 years or 35 years Lush.......this is your final warning......

Stop rocking the boat....

Wednesday, May 9th 2007, 6:57pm

by jmduke7

The only difference in any of your valves are that 1-2 & 4 are flow control valve and 3 is not. The shuttering or vibration you hear is the diaphragm. This sometimes happens when a valve is having trouble shutting down / closing. I am not a big fan of theses particular valves, but I would also not recommend replacing them with another brand. You might , however, may want to rebuild them by purchasing the same valves and strip out the parts.

Wednesday, May 9th 2007, 6:37pm

by lush96

rainbird has such horrible products. get rid of them. 16 years of experience tell me this.

Tuesday, May 1st 2007, 3:48am

by Tom

back to your #2 problem

close (clockwise) the flow control
open solenoid
slowly open flow control to allow water to pass thru valve

Monday, April 30th 2007, 7:01pm

by Tom

valves 2 and 3 have the rainbird plastic "wrench" (for lack of a beter word) on them. You can take it off and use it on the other valves to open the solenoid.

Monday, April 30th 2007, 2:42pm

by Aitch

I'm new to sprinkler systems.

I just purchased a house.

When I opened the main water line valve to my sprinkler system several heads opened up and a part of the yard was getting watered. However I couldn't turn those heads off with the timer/controller so I turned the main water line valve off. Eventually I realized that I had a valve box that provided access to an array of valves (manifold?). Here is a picture labeled 1,2,3,4. 2 and 3 have manual shut-offs and I determined that 3 hadn't been shut all the way an that is why some heads started spewing water when I opened the main valve. Next I figured that I was supposed to open these manually, valves 2 and 3 that is. However when I open #2 up to it starts to vibrate and the manifold starts to shudder and make a hammering sound. Can anybody set me straight on what is going on . Also why are 1 and 4 different from 2 and 3. A lesson in sprinkler valvology would be greatly appreciated.

Thank You very much,
Aitch