You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4430 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Wednesday, November 29th 2006, 5:46pm

by SprinklerGuy

That is fairly normal for the anti siphon type valves to make that noise...HOWEVER...I would caution you as to that high of pressure. You really want lower pressure and higher CFM...cubic feet (of air) per minute...

This can only be achieved by using a larger can rent them at the rental yard next year.

Good luck...

Wednesday, November 29th 2006, 5:19am

by tviles

Compressed Air thru valve

I installed a PVC 3/4 x 3/4 x 1/2 tee near my water source. I put a 1/2 PVC plug in it for regular use and remove it to thread in air connector for compressor. Question is I manually open the valves one at a time and applied 120psi compressed air. The valves sounded like french horns on crack. The valves are the Toro 1 inch backflow breakover type. Will this hurt the valves? Guess I will find out next summer huh?