You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4625 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Wednesday, April 12th 2006, 5:41am


sprinklerguy may be on to something...

if you dont have a multimer unhook the zone 2 wire from the timer... run the other four zones... the fuse probably won't blow... go find the zone 2 solenoid and disconnet the wires there... hook the zone 2 wire back up to the timer and run it again... it still probably won't blow which means the timer and wire are good... replace the solenoid

Wednesday, April 12th 2006, 3:26am

by SprinklerGuy

Any bets on whether or not it is zone 2? ;)

Tuesday, April 11th 2006, 1:09pm

by Wet_Boots

Short circuit. Get a multimeter and start checking resistances to the valves. One reading should be much lower than the others, and that one will be the short, and tell you what valve solenoid needs replacing.

Tuesday, April 11th 2006, 6:34am

by wease34

Rain Bird ES-6

My controller keeps blowing fuses. Just started about 2 weeks ago. It indicated "No Pwr" on the controller. I have power all the way to the controller. Finally got it to run Zone 1 a while ago. As soon as it finished and switched to Zone 2 it blew another fuse. Can't keep it in fuses. Do you have any idea where to start looking? I am totally illiterate when it comes to electricity. It did run the complete watering cycle for Zone 1 and then just quit. I have 5 watering zones. Thanks for any help.