You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5069 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Sunday, August 1st 2004, 3:28pm

by hjc13

Thank you for the reply, I appreciate your feed back. I guess it just takes some practice.

Thursday, July 29th 2004, 4:54am

by mburnickas

the other was is to unscrew the screw, turn on the water and pull out the nozzle with pliers (using the nozzle tabs/ears).

Monday, July 26th 2004, 5:02pm

by hjc13

PGP Nozzles

Hi All! I installed my first set of Hunter PGP rotors this evening (with success!) After testing the zone, I decided to exchange two regular nozzles with two Low Angle nozzles. How do you get the original nozzle out of the sprinkler head without damaging it? I loosened the set screw from the top and turned the zone on with hopes of the nozzle shooting out. That didn't work. I finally got the nozzles out with a pair of needle nose pliers. The nozzles didn't look to pretty after that. Thanks for your help! How about removing PGJ nozzles?